background image

42

Basic Operations

Communicating

Adjusting the transmit power

When communicating with a nearby station, the transmit power level may be lowered to 
reduce the battery power consumption.

1

 Press 

.

  Each time 

 is pressed, the transmit power level 

changes in the following order:

  “HIGH” → “LOW” → “MID”

Model

HIGH

MID

LOW

FTM-100DR/DE

50 W

20 W

5 W

Adjusting the microphone sensitivity

The sensitivity (gain) of the microphone can be adjusted.

1

  Press and hold 

 for over one second.

  The Setup menu appears.

2

  Rotate the DIAL to select 

[2 TX/RX]

, then press 

.

  The menu list appears.

3

  Rotate the DIAL to select 

[2 MIC GAIN]

, then press 

.

  The microphone gain setting value appears.

4

  Rotate the DIAL to select the desired microphone 

gain setting.

  “1 MIN” → “2 LOW” → “3 NORMAL” → “4 HIGH”

 Tip 

  The default setting: 3 NORMAL

5

  Press and hold 

 for over one second.

  The microphone sensitivity is set and the display returns to the previous operating 

screen.

 Tip 

  You can also return to the previous operating screen by pressing 

 3 times.

Summary of Contents for FTM-100DR/DE

















































































































































































Reviews: