16
Display Indications
It operates as an S meter in receive. In transmit, select the desired meter from: PO,
COMP, ALC, VDD, ID, and SWR.
Displays the current operation mode.
In VFO mode, “VFO-A” or “VFO-B” is displayed. In memory mode, the type and chan-
nel number of the recalled memory are displayed.
This display warns of an abnormality in the antenna system. If it lights up, check the
antenna system immediately.
Displays the transmit/receive frequency of VFO-A.
Displays the transmit/receive frequency of VFO-B. While the clarifier function is oper
-
ating, the offset (difference between the receive frequency and the transmit frequen
-
cy) is displayed.
The functions that operate when the [FUNC] knob is turned are displayed.
Displays the passband status of the DSP filter.
Displays the mode, the sweep speed, and span width (display range) of the scope
screen.
Displays the setting status of assorted important receiver operations. The setting can
be changed by touching it.
The icon of the operating function lights up.
Touch the scope screen keys to switch the display mode of the screen between the
3DSS display and waterfall display, to display the oscilloscope and AF-FFT, to switch
the display area of the scope screen, to set the frequency span (display range), or to
switch the sweep speed.
Summary of Contents for FTDX10
Page 1: ...Operation Manual...
