114
Specifications
General
Tx Frequency Range:
1.8MHz - 54MHz (Amateur bands only)
70MHz - 70.5MHz (UK Amateur bands only)
Rx Frequency Range:
30kHz - 75MHz (operating)
1.8MHz - 29.699999MHz (specified performance, Amateur bands only)
50MHz - 53.999999MHz (specified performance, Amateur bands only)
70MHz - 70.499999MHz (
specified performance, UK Amateur bands only
)
Emission Modes:
A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), G1B (PSK)
Frequency Steps:
1/10Hz (SSB, CW), 10/100Hz (AM, FM)
Antenna Impedance:
50Ω, unbalanced (Antenna Tuner “OFF”)
HF: 16.7 - 150Ω, unbalanced (Antenna Tuner “ON”)
50MHz: 25 - 100Ω, unbalanced (Antenna Tuner “ON”)
Operating Temperature Range: +32°F to +122°F (0°C to +50°C)
Frequency Stability:
±0.5ppm (after 1 minute @ +32°F to +122°F [0°C to +50°C])
Supply Voltage:
DC13.8V ± 15% (Negative Ground)
Power Consumption (approx.) Rx (no signal) 2.5A
Rx (signal present) 3A
Tx (100W) 23A
Dimensions (WxHxD):
10.5” x 3.6” x 10.4” (266 x 91 x 263mm)
Weight (approx.):
13.0 lbs (5.9kg)
Transmitter
Power Output:
5 - 100W (5 - 25W AM carrier)
Modulation Types:
J3E (SSB): Balanced
A3E (AM): Low-Level (Early Stage)
F3E (FM): Variable Reactance
Maximum FM Deviation:
±5.0kHz / ±2.5kHz (Narrow)
Harmonic Radiation:
Better than -50dB (1.8MHz - 29.7MHz Amateur bands)
Better than -63dB (50MHz Amateur band)
Better than -60dB (70MHz UK Amateur band)
SSB Carrier Suppression:
At least 60dB below peak output
Undesired Sideband Suppression: At least 60dB below peak output
3rd-order IMD:
-31dB @14MHz 100W PEP
Bandwidth:
3kHz (LSB, USB), 500Hz (CW), 6kHz (AM), 16kHz (FM)
Audio Response (SSB):
Not more than -6dB from 300 to 2700Hz
Microphone Impedance:
600Ω (200 to 10kΩ)
Summary of Contents for FTDX10
Page 1: ...Operation Manual...
