QUICK SPLIT FREQ
Function: Selects the amount the frequency is
offset when the Quick Split feature is
enabled.
Available Values: -20 - 0 - 20kHz (1 kHz/step)
Default Setting: 5kHz
•
Press and hold the [SPLIT] key to activate
VFO-B split frequency operation, thereby offset
-
ting the transmitter by the specified frequency.
•
Each time the [SPLIT] key is pressed and
held, the frequency offset is increased by the
setting amount.
SPLIT FREQ DISPLAY
Function: Setting the display method of the trans-
mit frequency during split operation.
Available Values: FREQ / DELTA
Default Setting: FREQ
Description:
FREQ: Displays the transmit frequency.
DELTA: The offset value with respect to the
receive frequency is displayed as “+” or
“-”.
TX TIME OUT TIMER
Function: Sets the Time-Out Timer countdown
time.
Available Values: OFF / 1 - 30 min
Default Setting: OFF (10 min, European Version)
Description: When the time-out timer function
is active, a beep is emitted when a
continuous transmission nears the
set time. About 10 seconds later, the
transceiver is forced to return to the
receiving mode.
MIC SCAN
Function: Activates the microphone automatic
scanning function.
Available Values: OFF / ON
Default Setting: ON
Description: Sets the operation of the UP/DWN
keys on the microphone.
ON: Starts scanning automatically by pressing
and holding the UP/DWN key for 1 second
or more (Scanning continues even after
releasing the button). To stop scanning,
press the UP/DWN key again briefly or
press the PTT button to transmit.
OFF: Scans only while pressing and holding the
UP/DWN key. To stop scanning, release
the button.
MIC SCAN RESUME
Function: Sets the Scan Resume function.
Available Values: PAUSE / TIME
Default Setting: TIME
Description:
PAUSE: During automatic scanning, the scanner
will hold until the signal disappears.
TIME: If the signal does not disappear within
five seconds, the scanner will resume
scanning for the next active channel
(frequency).
If there are no signals, the scanner con-
tinues scanning.
REF FREQ FINE ADJ
Function: Adjusts the reference oscillator.
Available Values: -25 - 0 - 25
Default Setting: 0
Description: The frequency may be calibrated
by connecting a frequency counter
to the transceiver, or by receiving a
standard frequency such as WWV or
WWVH.
KEYBOARD LANGUAGE
Function: Selects the keyboard language.
Available Values: JAPANESE / ENGLISH(US)
ENGLISH(UK) / FRENCH
FRENCH(CA) / GERMAN
PORTUGUESE
PORTUGUESE(BR)
SPANISH / SPANISH(LATAM)
ITALIAN
Default Setting: Depends on the transceiver ver-
sion.
100
Summary of Contents for FTDX10
Page 1: ...Operation Manual...
