Yaesu FT DX 9000D - COMPUTER AIDED TRANSCEIVER, Operation Manual

Page: 9 / 156

Page 7 FT
DX
9000D O
PERATION
M
ANUAL
Before You Begin. . .
8. Resetting the Microprocessor
Ë
Resetting Memories (Only)
Use this procedure to reset (clear out) the Memory channels previously stored, without affecting any configuration changes
you may have made to the Menu settings.
1. Press the front panel’s POWER switch to turn the
transceiver off.
2. Press and hold in the A M switch; while holding
it in, press and hold in the front panel’s POWER
switch to turn the transceiver on. Once the transceiver
comes on, you may release the A
M switch.
Ë
Menu Resetting
Use this procedure to restore the Menu settings to their factory defaults, without affecting the memories you have pro-
grammed.
1. Press the front panel’s POWER switch to turn the
transceiver off.
2. Press and hold in the MNU (Menu) key; while hold-
ing it in, press and hold in the front panel’s POWER
switch to turn the transceiver on. Once the transceiver
comes on, you may release the MNU (Menu) key.
Ë
Full Reset
Use this procedure to restore all Menu and Memory settings to their original factory defaults. All Memories will be cleared
out by this procedure.
1. Press the front panel’s POWER switch to turn the
transceiver off.
2. Press and hold in the FAST and LOCK switches;
while holding them in, press and hold in the front
panel’s POWER switch to turn the transceiver on.
Once the transceiver comes on, you may release the
other two switches.
A M switch
FAST switch
&
LOCK switch
POWER switch
POWER switch
POWER switch
MNU key