Yaesu FT DX 9000D - COMPUTER AIDED TRANSCEIVER, Operation Manual

Page: 139 / 156

Page 137 FT
DX
9000D O
PERATION
M
ANUAL
M
ENU
M
ODE
SOFT
SHARP
SHARP
WIDE
MEDIUM
F
ILTER
P
ASSBAND
F
ILTER
S
HAPE
MODE-DAT G
ROUP
053. DATA IN SELECT
Function : Selects the data input to be used on the
PKT mode.
Available Values : DATA/PC
Default Setting : DATA
DATA:Uses the data input line which is connected to
the rear panel’s PACKET jack while using the
PKT mode.
PC: Uses the data input line which is connected to
the rear panel’s
AUDIO IN jack while using the
PKT mode.
054. DATA GAIN
Function : Sets the data input level from the TNC to
the AFSK modulator.
Available Values : 0 ~ 255
Default Setting : 128
055. DATA OUT
Function : Selects the receiver to be connected to
the data output port (pin 4) of the PACKET jack.
Available Values : VFO-a/VFO-b
Default Setting : VFO-a
056. DATA VOX DELAY
Function : Adjusts the “VOX” delay (receiver recov-
ery) time on the PKT mode.
Available Values : 30 ~ 3000 msec
Default Setting : 300 msec
057. DATA VOX GAIN
Function : Adjusts the “VOX” gain on the PKT mode.
Available Values : 0 ~ 255
Default Setting : 128
MODE-FM G
ROUP
058. FM MIC GAIN
Function : Sets the microphone gain for the FM mode.
Available Values : MCVR/0 ~ 255 (FIX)
Default Setting : 160
When this menu is set to “MCVR,” you may adjust
the microphone gain using the front panel’s
MIC knob.
059. FM MIC SELECT
Function : Selects the microphone to be used on the
FM mode.
Available Values : FRONT/REAR/DATA/PC
Default Setting : FRONT
FRONT: Selects the microphone connected to the
front panel’s MIC jack while using the FM
mode.
REAR: Selects the microphone connected to the
rear panel’s MIC jack while using the FM
mode.
DATA: Selects the microphone connected to pin 1
of the
PACKET Jack while using the FM
mode.
PC: Selects the microphone connected to the
rear panel’s
AUDIO IN 3.5-mm jack while
using the FM mode.
060. RPT SHIFT
(
28MHz
)
Function : Sets the magnitude of the repeater shift
on the 28 MHz band.
Available Values : 0 ~ 1000 kHz
Default Setting : 100 kHz
061. RPT SHIFT
(
50MHz
)
Function : Sets the magnitude of the repeater shift
on the 50 MHz band.
Available Values : 0 ~ 4000 kHz
Default Setting : 1000 kHz