Yaesu FT DX 9000D - COMPUTER AIDED TRANSCEIVER, Operation Manual

Page: 16 / 156

Page 14 FT
DX
9000D O
PERATION
M
ANUAL
C
ONNECTION OF
A
NTENNA AND
P
OWER
C
ABLES
Please follow the outline in the illustration regarding the proper connection of antenna coaxial cables, as well as the AC
power cable.
Use a short, thick, braided
cable to connect your sta-
tion equipment to the bur-
ied ground rod (or alterna-
tive earth ground system).
Advice
G
Do not position this apparatus in a location with direct exposure to sunshine.
G
Do not position this apparatus in a location exposed to dust and/or high humidity.
G
Ensure adequate ventilation around this apparatus, so as to prevent heat build-up and possible reduction of performance
due to high heat.
G
Do not install this apparatus in a mechanically-unstable location, or where objects may fall onto this product from
above.
G
To minimize the possibility of interference to home entertainment devices, take all precautionary steps including sepa-
ration of TV/FM antennas from Amateur transmitting antennas to the greatest extent possible, and keep transmitting
coaxial cables separated from cables connected to home entertainment devices.
G
Ensure that the AC power cord is not subject to undue stress or bending, which could damage the cable or cause it to be
accidentally unplugged from the rear panel AC input jack.
G
Be absolutely certain to install your transmitting antenna(s) such that they cannot possibly come in contact with TV/FM
radio or other antennas, nor with outside power or telephone lines.
Ground Rod
AN
TE
NNA
"
1"
AN
TE
NNA
"
2"
AN
TE
NNA
"
3"
AN
TE
NNA
"
4"
A B
I
NSTALLATION AND
I
NTERCONNECTIONS