Page 62
FT-897D O
PERATING
M
ANUAL
MENU MODE
No
•
077
[
SCAN MODE
]
Function:
Selects the desired Scan-Resume mode.
Available Values:
TIME/BUSY/STOP
Default:
TIME
This Menu Item allows you to select your favorite method
of scan-restart after the scanner has stopped on an incoming
signal (when the squelch opens).
TIME
: The scanner will hold for a fixed length of time, set
via MENU MODE
No-078
[
SCAN RESUME
]
, then
resume whether or not the other station is still trans-
mitting.
BUSY
: The scanner will hold until the signal disappears, then
will resume after one second.
STOP
: The scanner will stop when a signal is received, and
will not restart.
MENU MODE
No
•
078
[
SCAN RESUME
]
Function:
Sets the delay time for scanning resumption.
Available Values:
1 ~ 10 (sec)
Default:
5
MENU MODE
No
•
079
[
SPLIT TONE
]
Function:
Enables/disables split CTCSS/DCS cording.
Available Values:
OFF/ON
Default:
OFF
MENU MODE
No - 080
[
SQL
/
RF GAIN
]
Function:
Selects the configuration of the front panel’s SQL/
RF knob.
Available Values:
RF-GAIN/SQL
Default:
Depends on transceiver version.
MENU MODE
No - 081
[
SSB MIC GAIN
]
Function:
Adjusts the microphone gain level for the SSB
mode.
Available Values:
0 ~ 100
Default:
50
MENU MODE
No - 082
[
SSB STEP
]
Function:
Selects the tuning steps for the
MEM/VFO CH
knob on the SSB mode.
Available Values:
1kHz/2.5kHz/5kHz
Default:
2.5kHz
MENU MODE
No - 083
[
TONE FREQ
]
Function:
Setting of the CTCSS Tone Frequency.
Available Values:
50 Standard CTCSS tones
Default:
88.5 Hz
MENU MODE
No - 084
[
TOT TIME
]
Function:
Select the Automatic Power Off time.
Available Values:
OFF/1 ~ 20 (min)
Default:
OFF
M
ENU
O
PERATION
MENU MODE
No
•
085
[
TUNER
/
ATAS
]
Function:
Selects the device (
FC-30
or
ATAS-100/-120
)
to be controlled via the front panel’s [
A
](
TUNE
) key.
Available Values:
OFF/ATAS(HF)/ATAS(HF&50)/
ATAS(ALL)/TUNER
Default:
OFF
OFF
:
The [
A
](
TUNE
) key is disabled.
ATAS
(
HF
)
:
The [
A
](
TUNE
) key will activate the optional
ATAS-100/-120
on the HF amateur bands.
ATAS
(
HF&50
)
: The [
A
](
TUNE
) key will activate the optional
ATAS-100/-120
on the HF amateur bands
and 50 MHz amateur band.
ATAS
(
ALL
)
:
The [
A
](
TUNE
) key will activate the optional
ATAS-100/-120
on the all amateur bands
which enable to the
FT-897D
transceiver.
TUNER
:
The [
A
](
TUNE
) key will activate the optional
FC-30
.
MENU MODE
No
•
086
[
TX IF FILTER
]
Function:
Selects the Transmit IF filter.
Available Values:
CFIL/FIL1/FIL2
Default:
CFIL
MENU MODE
No
•
087
[
VOX DELAY
]
Function:
Sets the “hang time” for the VOX circuitry.
Available Values:
100 ~ 3000 (ms)
Default:
500 (ms)
MENU MODE
No - 088
[
VOX GAIN
]
Function:
Sets the gain of the VOX circuitry’s input audio
detector.
Available Values:
1 ~ 100
Default:
50
MENU MODE
No
•
089
[
XVTR A FREQ
]
Function:
Allows an arbitrary frequency to be set on the dis-
play, to allow direct frequency readout during transverter op-
eration; can also be used to account for frequency conversion
inaccuracies when a known reference frequency is known.
Available Values:
00,000,00 ~ 99,999,99 (kHz)
Default:
Current VFO frequency.
MENU MODE
No
•
090
[
XVTR B FREQ
]
Function:
Allows an arbitrary frequency to be set on the dis-
play, to allow direct frequency readout during transverter op-
eration; can also be used to account for frequency conversion
inaccuracies when a known reference frequency is known.
Available Values:
00,000,00 ~ 99,999,99 (kHz)
Default:
Current VFO frequency.
MENU MODE
No
•
091
[
XVTR SEL
]
Function:
Enable/disable the Transverter function.
Available Values:
OFF/XVTR A/XVTR B
Default:
OFF
OFF
:
Disables the Transverter operation feature.
X VTR A
: Activates the transverter operation feature.
The display frequency may be set via MENU
No-
089
[
XVTR A FREQ
]
.
X VTR B
: Activates the second transverter operation display.
The display frequency may be set via MENU
No-
090
[
XVTR B FREQ
]
.
