REGULAR MEMORY
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
Page 34 of 77
6.
Repeat step 5 to modify the remaining letters, numbers, or symbols of the desired
Name Tag
.
7.
When you have completed the modification of the
Name Tag
, press and hold in the
SET key
momentarily to save the tag and exit to normal operation.
0.
To delete/hide an Alpha-numeric Name Tag for a memory:
The only way to manually delete a
Name Tag
from a
Memory
channel is to delete the channel
then re-enter it without the tag.
Store Independent Transmit Frequencies
To store independent transmit frequencies (odd splits) in a memory channel:
1.
Store the receiving frequency using the instructions described in
Store a Frequency in
Memory
on page 32.
2.
Turn to the desired transmit frequency on the
Main
band, then press and hold in the
SET key
for ½ second.
3.
Within ten seconds of pressing the
SET
key, use the
DIAL
knob or
microphone’s
and
buttons to select the same memory channel number as
used in step 1 above.
4.
Press and hold in the
PTT
switch, then press the
SET key
momentarily while
holding the
PTT
switch to save the entry and exit to normal operation. (This will not
cause transmission; instead, it signals the microprocessor that a separate transmit
frequency is being programmed into that memory register.)
0.
Whenever you recall a memory which contains independently-stored
transmit and receive frequencies, the
(odd split) indicator will be
displayed.