DTMF AUTODIALER
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
Page 53 of 77
Operating the DTMF Autodialer
Sixteen
DTMF Autodialer
memories are available on the
FT−8900R
. These
DTMF Autodialer
memories can store up to 16 digits of a telephone number for repeater autopatch or other uses.
To load DTMF Autodialer memories:
1.
Press the
SET key
momentarily to enter the
Set
mode.
2.
Rotate the
DIAL
knob to select
Menu #15
DTMF W
.
3.
Press the
DIAL
knob momentarily, then rotate the
DIAL
knob to select the
DTMF Autodialer
memory channel number (
d-1
through
d-16
) into which you wish
store a telephone number.
4.
Press the
DIAL
knob momentarily, then rotate the
DIAL
knob to select the
first digit of the telephone number you wish to store.
5.
When you have selected the correct digit, press the
DIAL
knob momentarily.
6.
Rotate the
DIAL
knob to select the next number in this current
DTMF Autodialer
memory register.
7.
When you have selected the correct digit, press the
DIAL
knob momentarily.
8.
Repeat this steps 6 and 7 for each remaining digit in the telephone number.
9.
Press the
Main
band
key momentarily to delete any previously-stored data after
the cursor. If you make a mistake, press the microphone’s
key to move back to
the first digit, then re-enter the correct number.
10.
When entry of all digits is complete, press the
SET key
momentarily to save the
new setting.
11.
If you wish to store another
DTMF
string, rotate the
DIAL
knob to select another
DTMF
memory register, then repeat steps 4 through 10.
12.
When all required
DTMF
memories are filled to your satisfaction, press and hold in the
DIAL
knob for ½ second to exit to normal operation.
0.
To transmit the memorized telephone number:
1.
Press the
SET key momentarily to enter the Set mode.
2.
Rotate the
DIAL
knob to select Menu #15 DTMF W.
3.
Press the
DIAL
knob momentarily, then rotate the
DIAL
knob to select the
DTMF Autodialer memory channel to be transmitted.
