![background image](http://html2.mh-extra.com/html/yaesu/ft-60r/ft-60r_operating-manual_3128263072.webp)
FT-60R O
PERATING
M
ANUAL
70
Set Mode Item 1
[
APO
]
Function
: Setting of the Automatic Power-Off feature.
Available Values
: OFF/0.5H - 12.0 H in 0.5 hour multiples
Default
: OFF
Set Mode Item 2
[
AR BEP
]
Function
: Selects the Beep option during ARTS operation.
Available Values
: INRANG/ALWAYS/OFF
Default
: INRANG
INRANG: Beeps sound only when the radio first detects that you are within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other sta-
tion (every 15 or 25 seconds when in range).
OFF:
No alert beeps sound.
Set Mode Item 3
[
AR INT
]
Function
: Selects the Polling Interval during ARTS operation.
Available Values
: 25 SEC/15 SEC
Default
: 25SEC
Set Mode Item 4
[
ARS
]
Function
: Enables/Disables the Automatic Repeater Shift function.
Available Values
: ARS. ON/ARS.OFF
Default
: ARS. ON
Set Mode Item 5
[
BCLO
]
Function
: Enables/Disables the Busy Channel Lock-Out feature.
Available Values
: BCL. ON/BCL.OFF
Default
: BCL.OFF
Set Mode Item 6
[
BEEP
]
Function
: Enables/Disables the beeper.
Available Values
: KEY+SC/KEY/OFF
Default
: KEY+SC
KEY+SC: The beeper sounds when you press any key, or when the scanner stops.
KEY:
The beeper sounds when you press any key.
OFF:
Beeper is disabled.
Set Mode Item 7
[
BELL
]
Function
: Selects the number of CTCSS/DCS Bell ringer repetitions.
Available Values
: OFF/1T/3T/5T/8T/CONT (Continuous ringing)
Default
: OFF
S
ET
(
M
ENU
)
M
ODE