![background image](http://html2.mh-extra.com/html/yaesu/ft-60r/ft-60r_operating-manual_3128263073.webp)
FT-60R O
PERATING
M
ANUAL
71
Set Mode Item 8
[
BSY.LED
]
Function
: Enables/Disables the
BUSY
LED while the Squelch is open.
Available Values
: LED. ON/LED.OFF
Default
: LED. ON
Set Mode Item 9
[
CLK.SFT
]
Function
: Shifting of the CPU clock frequency.
Available Values
: SFT.OFF/SFT. ON
Default
: SFT.OFF
This function is only used to move a spurious response “birdie,” should it fall on a desired
frequency.
Set Mode Item 10
[
CWID
]
Function
: Enables/disables the CW identifier during ARTS operation.
Available Values
: TX OFF/TX ON
Default
: TX OFF
Set Mode Item 11
[
CW WRT
]
Function
: Programs and activates the CW Identifier (used during ARTS operation).
See page 53 for details.
Set Mode Item 12
[
DC VLT
]
Function
: Indicates the DC Supply Voltage.
Set Mode Item 13
[
DCS.COD
]
Function
: Setting of the DCS code.
Available Values
: 104 standard DCS codes
Default
: DCS.023
Set Mode Item 14
[
DCS.N/R
]
Function
: Enables/Disables “Inverted” DCS
code decoding.
Available Values
: T/RX N, RX R, TX R,
T/RX R
Default
: T/RX N
Set Mode Item 15
[
DT DLY
]
Function
: Setting of the DTMF Autodialer Delay Time.
Available Values
: 50MS/100MS/250MS/450MS750MS/1000MS
Default
: 450MS
Set Mode Item 16
[
DT SPD
]
Function
: Setting of the DTMF Autodialer Sending Speed.
Available Values
: 50MS (high speed)/100MS (low speed)
Default
: 50MS
DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754
–
–
–
–
–
–
S
ET
(
M
ENU
)
M
ODE