Yaesu FR5DR Operating Manual Download Page 50

Page: 50 / 80

Hands-free operation with a Bluetooth

headset (VOX function)

When FT5DR/DE's VOX (automatic voice transmission) function is turned on, you can

use the Bluetooth

headset to perform hands-free operation that transmits automatically

just by talking.
Turn on the VOX function according to “VOX Operation” (page 50).

The VOX function settings are the same for the Bluetooth

headset and the microphone of

the transceiver. If you do not use the Bluetooth

headset and do not use the VOX function

with the transceiver microphone, set it to OFF.

Send by pressing the button on the Bluetooth

headset (when the VOX function is OFF)

When the VOX function is OFF, pressing the “Call button*” on the Bluetooth

head-

set once will keep the FT5DR/DE in transmit and you can make a call using the

Bluetooth

headset.

If you press the “Call button”* again, FT5DR/DE will return to

the reception state.
*The button name may differ depending on your Bluetooth

headset.

Press briefly to transmit

SSM-BT10

: When the Multi-Function Key is pressed, a beep will sound and the FT5DR/

DE will continue to transmit.

Press the Multi-Function Key again, a beep will sound and the FT5DR/DE

will be in receive mode.

Press the

PTT

switch on the FT5DR/DE to speak into the microphone of the Bluetooth

headset regardless of whether the VOX function is ON or OFF.

Summary of Contents for FR5DR

















































































Search results

Summary of Contents for FR5DR

Reviews:

Related manuals for FR5DR

Brands by name

Popular brands

Yaesu FR5DR, Operating Manual

Search results

Summary of Contents for FR5DR

Reviews:

Related manuals for FR5DR

Brands by name

Popular brands