Yaesu FR5DR Operating Manual Download Page 25

Page: 25 / 80

Changing the Frequency Step

The

DIAL

knob rotation frequency step may be changed. Normally, the factory default

setting will provide a good frequency step.

1. Press and hold the [

menu

] key, then touch [

CONFIG

2. Touch [

18 STEP

] then rotate the

DIAL

knob to change the frequency step.

3. Press the

PTT

switch to save the setting and return to normal operation.

• In the default setting, of the frequency step is set to “AUTO”, which automatically provides

a suitable frequency step according to the frequency band.

• The frequency steps that can be set differ depending on the frequency band.

Selecting the Communication Mode

●

Using AMS

The FT5DR/DE transceiver is equipped with the AMS

(Automatic Mode Select) function which automatically

selects the communication mode corresponding to the

received signal.
To utilize the AMS function, touch [

MODE

] repeatedly

to display “

”*, “

”* or “

”* on the display. After

receiving the signal, “FM” of “

” will change to indicate

the mode of the received signal.
*The display differs depending on the received signal.

The bar at the top of the mode display indicates that the AMS feature is on.

●

Setting the transmit mode when using the AMS function

The AMS function will automatically set the receiver to

the mode of the received signal, but the transmission

mode may be fixed regardless of the received mode.

1. Touch [

TX AUTO

]* to tune to the desired transmit

mode as follows.

*The display differs depending on the transmit mode.

Transmit Mode

Receive and Transmit

(default)

Receive׃

Automatically selects the communication mode of transmis-

sion according to the signal being received.

Transmit:

Transmits automatically in the communication mode selected

by the AMS function.

Receive׃

Automatically selects the communication mode of transmis-

sion according to the signal being received.

Transmit:

Always transmits in the analog FM mode.

(TX DIGITAL)

Receive׃

Automatically selects the communication mode of transmis-

sion according to the signal being received.

Transmit׃

Always transmits in the DN mode.

Summary of Contents for FR5DR

















































































Search results

Summary of Contents for FR5DR

Reviews:

Related manuals for FR5DR

Brands by name

Popular brands

Yaesu FR5DR, Operating Manual

Search results

Summary of Contents for FR5DR

Reviews:

Related manuals for FR5DR

Brands by name

Popular brands