50
VOX Operation
The VOX system provides automatic transmit/receive switching based on voice input to
the microphone or Bluetooth
®
Headset. With the VOX system enabled, you do not need
to press the
PTT
switch in order to transmit, and it is not necessary to use a VOX head-
set in order to utilize VOX operation.
Setting VOX function
1. Press and hold the [
F
menu
] key, and then touch [
TX/
RX
].
2. Touch [
3 AUDIO
], and then touch [
5 VOX
].
3. Press the [
F
menu
] key, and then rotate the
DIAL
knob
to select “
LOW
” or “
HIGH
”.
OFF
: VOX function OFF
LOW
: VOX function ON (VOX Gain Level “
LOW
”)
HIGH
: VOX function ON (VOX Gain Level “
HIGH
”)
Whether set to “LOW” or “HIGH”, the audio from
the Bluetooth
®
headset is automatically transmitted
while the Bluetooth
®
headset is connected. When the
Bluetooth
®
function is OFF, the audio from the FT5DR/
DE microphone is automatically transmitted.
5 VOX
VOX : ON
DELAY : 0.5 sec
• Even if the VOX function is enabled, it will not be in the transmission state while receiving
a signal.
• If the VOX function is ON and the Bluetooth
®
function is OFF, the PTT switch will be
disabled.
• Please turn OFF the Bluetooth
®
function when using the VOX function with the FT5DR/DE
microphone.
4. Press the
PTT
switch to return to normal operation.
●
Disable the VOX function
To cancel VOX and return to
PTT
operation, just repeat the above procedures, se-
lecting “
OFF
” in step 3 above.
Set the VOX (automatic voice transmission) delay time
During transmission with VOX (automatic voice transmission) function, set the time to
stop speaking and return to reception.
1. Press and hold the [
F
menu
] key, and then touch
[
TX/RX
].
2. Touch [
3 AUDIO
], and then touch [
5 VOX
].
3. Rotate the
DIAL
knob to select [
DELAY
].
