![background image](http://html1.mh-extra.com/html/yaesu/dr-1x/dr-1x_operating-manual_3110158039.webp)
39
Appendix
Appendix
Installation of the Optional Voice Guide Unit "FVS-2"
1
Turn the DR-1X/DR-1XE [POWER] switch to “OFF”.
2
Disconnect all the cables from the DR-1X/DR-1XE
.
3
Referring to Figure 1, remove the 4 screws from each
side and 7 screws from the top cover of the DR-1X/DR-
1XE, then remove the top cover.
Note
Figures in this page show the outline of the DR-1X.
Figure 1
4
Referring to Figure 2, remove the 4 screws from the top
cover of the RX-Unit, then remove the top cover.
Figure 2
5
Refer to Figure 3 for the mounting location for the FVS-2.
Figure 3
6
Push the FVS-2 (component side up) onto the pins
corresponding to its assigned mounting location on the
DR-1X/DR-1XE.
Gently press the FVS-2 down until it is firmly seated on
the connector.
Figure 4
7
Replace the top cover of the RX-Unit and the 4 screws.
8
Replace the top cover of the DR-1X/DR-1XE and 15 screws.
9
Connect all the cables to the DR-1X/DR-1XE.