21
Repeater Operation
Basic Operations
Switching the operating mode
The operating mode can be switched between the AUTO mode in which the communication mode switches automatically corresponding
to the received/transmitted signal types, and the FIX mode in which the signals are always received/transmitted in the previously
selected communication mode.
Tip
In the factory default, the RX band is set to the AUTO mode, and the TX band to the FIX mode.
1
Touch
[AUTO]
to activate the AMS (automatic mode select) function
One of the communication modes will be selected automatically and the corresponding
indicator will be displayed in red (also see the next page).
⃯⃯
⃯⃯
2
Touch
[FIX]
to operate in the FIX mode
The indicator of the selected communication mode will turn yellow on the operation
mode screen.
⃯⃯
⃯⃯