Operations
Follow the steps below to pair your YD-V36 with your mobile
phone:
• Press and hold
End button for 7-8 seconds
• Release as soon as the LED indicator alternately blinks red and
blue
NOTE: YD-V36 is now in pairing mode
•
Activate the Bluetooth
®
settings of your mobile phone
NOTE: The following steps are general procedure; to access
Bluetooth
®
Menu for you mobile phone, please refer to the User
Manual.
• Select SET-UP or CONNECT from your mobile phone menu
• Find and select OPTION to discover Bluetooth
®
devices;
establishing a connection may take several minutes
• If found, phone display should indicate
YD-V36 device was
detected or Select “
YD-V36” from the list
• Phone should give you a prompt asking if you want to pair the
device
• Select OK or ACCEPT and wait for prompt to enter passkey or
PIN
• Enter the code
0000
• Select “OK” to pair and connect the YD-V36 and the handset
NOTE:
If the YD-V36 and mobile handset did not successfully
pair, follow the steps below to retry pairing:
• Turn the YD-V36 OFF
• Turn OFF all other Bluetooth
®
devices before starting the pairing
process
• Repeat the pairing instructions from the beginning
IMPORTANT:
• After successfully pairing the device with your phone, the
YD-V36 will always connect with your phone every time it is
powered ON. No need to redo the pairing process unless the
paring information has been deleted
• The YD-V36 will connect to the last paired device every time it
is powered ON
A. Power ON/OFF
To turn the YD-V36 ON:
• Press and hold
End button for about 5-6 seconds
• Release after hearing indication tone
• The blue LED indicator will flash every 3 seconds
To turn the YD-V36 OFF:
• Press and hold
End button for 3 seconds
• Release after hearing indication tone
• The red LED indicator will flash 5 times
NOTE:
• YD-V36 will automatically Shut Off after 10 minutes with no
connection to a mobile phone
B. Pairing/Linking
Pairing Bluetooth
®
enabled devices like mobile phones with the
YD-V36 Speakerphone authorizes hands-free communication.
This step only needs to be performed once.
Before Pairing the YD-V36 Speakerphone:
• Ensure the YD-V36 is fully charged
• Ensure the YD-V36 is OFF
• Ensure the Bluetooth
®
on your mobile phone is activated
volume up
microphone
microphone
speaker
send button
end button
speed dial 1
charging port
speed dial 2
volume down
7
