Functions
YD-V36 Status
Operation
Cancel Calling
Calling
Press
End button once
Answer a Call
Ringing
Press
Send button once
Reject a Call
Ringing
Press
End button once
End a Call
During a Call
Press
End button once
Volume Up
During a Call
Press
VOL+ button
Volume Down
During a Call
Press
VOL- button
Microphone Mute
During a Call
Press
Send button twice
(consecutively)
Cancel Microphone
Mute
During a Call
(Microphone Mute)
Press
Send button twice
(consecutively)
Call Transfer from
YD-V36 to Mobile
Phone
During a Call
Press and hold
Send button for
2 seconds, release after hearing
indication tone
Call Transfer from
Mobile Phone to
YD-V36
During a Call
Press and hold
Send button for
2 seconds, release after hearing
indication tone
Redial Last
Number
Standby Mode and
Connected to a Device
Press
Send button twice
(consecutively)
Voice Dial
Standby Mode and
Connected to a Device
Press
Send button once
Speed Dial
1
Standby Mode and
Connected to a Device
Press
1 button once, to dial
the phone number stored on
the button
Speed Dial
2
Standby Mode and
Connected to a Device
Press
2 button once, to dial
the phone number stored on
the button
NOTE: Not all mobile phones support all functions listed above. Please
refer to your mobile phone’s user manual for further information.
Program Speed Dial Number
1. Make sure your mobile phone is connected with the YD-V36.
2. On your mobile phone, go to the contact that you want to store
on the Speed Dial.
• Under the phones menu, select transfer contact
• Transmit via Bluetooth
®
and select
YD-V36
NOTE: Transferring phone contact steps are different from each mobile
phone. Please refer to your phone user manual for more information.
3. After successful transfer, you can press button
1 or 2 to
Speed Dial stored phone numbers.
Set the last received call to Speed Dial Number
Simply press and hold button
1 or 2 for 3 seconds when receiving
a call, during a call, after a call or rejected a call to store the last
received call to Speed Dial button
1 or 2 .
Clear Speed Dial Numbers
Press and hold button
1 and 2 simultaneously for 2-3 seconds
Care And Maintenance
• Turn OFF the YD-V36 when not in use
• Do not let the YD-V36 be in contact with liquid as it is not
waterproof. Avoid putting it in places where there is excessive
moisture and humidity
• Do not expose the YD-V36 to direct sunlight nor place in areas
with high temperature, as it may result in an explosion
• If the YD-V36 is not in use for a prolonged period, store in a
cool, dry place, free from moisture, humidity and dust
• Do not use abrasive cleaning solvents to clean the YD-V36
• Do not expose the YD-V36 to contact with sharp objects as this
will cause scratching and damage
• Do not stick anything inside the YD-V36 as this may damage
internal components
• Do not attempt to disassemble the YD-V36, as it does not
contain serviceable components
Button Functions And Operation
8
