9
10
Before Use
Before Use
* When using the device with Clean/Moisture/ EMS Up Mode, the RF Mode indicator
repeats to blink on and off.
The device emits one short beep when the RF function is operating (RF Mode will be
displayed on the Indicator panel).
The device emits two short beeps when the Ion or EMS function is operating (RF
Mode will not be displayed on the Indicator panel).
The charging indicator will appear on the
indicator panel and will flash while the unit is
charging.
When charging has completed, the charging
indicator will turn solid.
* You can use the device while charging with
the AC adapter.
* Charging indicator will not appear during use.
●
Charging indicator
When treatment on Clean/Moisture/Eye Care/EMS Up/RF LED Mode has finished,
the devise will emit three short beeps. The indicator for the next mode will blink for
approx. 2 minutes in Standby Mode (device is not operating).
When you press the Power/Mode button, the next Mode which is waiting in
Standby Mode will start.
If the next mode is not started within approx. 2 minutes, the device will emit two short
beeps and the power will turn off automatically (Auto-off).
When treatment on Cool Mode has finished, the power will switch off automatically
(Auto-off) without the device going to Standby Mode. (The device emits two short
beeps and the power switches off.)
●
Standby/Auto-off (Automatic Power Off)
・
Press the Level/Vibration button to select Ion input/output and EMS levels.
・
Select from 5 intensity levels. Please select the intensity level which you feel the most comfortable.
●
Level indicator
Level 1
Level 2
Level 3
Level 4
Level 5
(Flashing)
<Charging>
<Full Charge>
(Solid lighting)
Each time you press the Power/Mode button, the treatment mode will be selected in
the following order:
Clean→Moisture→Eye Care→EMS Up→RF LED→Cool→Clean (repeat)
●
Mode indicator
RF/
Vibration/
Ion Cleansing
RF/
Vibration/
Ion Moisture
RF/EMS
RF/
LED
Cool
CLEAN
MOISTURE
EMS UP
RF LED
COOL
○
○
○
RF in operation
Ion or EMS Mode is
operating
One short beep
Two short beeps
Mode
Function
Mode Indicator
* You can select stronger/weaker ions for Clean and Moisture Modes.
* You can select stronger/weaker EMS level for EMS Up Mode.
* Always select Level 1 upon the first use until you are accustomed to use.
* Intensity level cannot be selected for Eye Care/RF LED/Cool Mode.
* RF intensity level cannot be selected.
EYE CARE
RF/Micro-current
Pre-testing on skin
●
Vibration
・
With Clean/Moisture Mode, the vibration function can be turned on/off by pressing
the Level/Vibration button for approx. 3 seconds or more.
* Vibration rhythm switches automatically.
* Vibration does not operate with Eye Care/EMS Up/RF LED/Cool Mode.
* When using the device or a cosmetic product for the first time, make sure to
perform a pre-test to check its compatibility with your skin.
1
Clean your skin.
・
Wash your arm with soap and water and wipe dry with a towel.
2
Apply cosmetics (gel or lotion) or water to your arm and use
the device for approx. three minutes on Moisture Mode.
・
Do not wet or rub the pre-testing site.
If you experience any skin abnormality (redness or burning sensation)
at the pre-testing site within 24 hours, stop to use the device.
CAUTION
Make sure to perform a pre-test in order to prevent skin problems from occurring.
If a rash, reddening, itch, stinging sensation, or other abnormality occurs at the
pre-testing site, immediately stop the pre-test and wash the pre-testing site.
During treatment, carefully check that your skin is not showing any
abnormality. Stop using the device immediately if the treatment does not
agree with your skin.
