17
18
Checklist for Possible Problems
After T
reatment
Checklist for Possible Problems
After Treatment
Checklist for Possible Problems
Symptom
Possible Causes
Solutions
Please charge the device
or connect the main unit
to the AC adapter.
→
→
→
→
Insufficient power
Power does not turn on
→
→
Press the Power/Mode
button for approx. three
seconds to turn on the
device
The Power/Mode button is
not being held long enough
Contact local distributor
(see page 21).
*Do not try to replace the
device by yourself as
this may cause a
malfunction.
→
→
Battery life ended
(battery can be charged
approx. 300 times).
Device only operates for
a few minutes even after
charging
→
→
The AC adapter is not
inserted into the wall
socket (connecting too
many plugs in one outlet
and such)
Connect the AC adapter to
a wall outlet.
Plug adapter into the main
unit
→
→
Adapter is not plugged into
main unit
Reset by pressing
Power/Mode and
Level/Vibration buttons at
the same time, this may
start charging.
Unit does not start
charging.
（ ）
Charge indicator
does not flash
Press the Power/Mode
button for about three
second to turn on the device
again.
You may have mistakenly
pressed the wrong button
→
→
Press the Power/Mode
button (see page 10).
The device is in standby
or Auto-off status
→
→
To keep the product clean, please be sure to clean it after each use.
1
Ensure the power is off and unplug the AC adapter
from the main unit.
2
To clean the electrode head, wipe it with a damped
and well-wrung cloth to remove dirt. Wash the cotton
stopper with water.
• Remove the cotton stopper from the main unit, and wash it with water then wipe
dry.
• Refrain from using an alkali cleaning agent, alcohol, thinner, benzene, nail polish
remover, or other such substance.
• Do not leave the unit with lotion or gel on it.
3
Wipe off any dirt from areas other than the electrode
head and cotton stopper with a dry cloth.
●
How to clean and store the product
Main unit is hot
Device was used
continuously.
Turn off and wait at least
1 hour before use
→
→
Storing
● If you will not be using the device for an extended period, clan the device before
storing.
● When the device is not in use, turn off the main body and disconnect the AC adapter
from the main body and wall outlet.
● Avoid storing the device near a stove or heater or in a bathroom or other
high-temperature/high-humidity location, location where there is exposure to direct
sunlight, or unstable location.
● Keep the device out of the reach of children or pets.
Maintenance and inspections
● If you have not used the device for an extended period, inspect it carefully and check
that the device works properly and safely.
● If the device is malfunctioning, go to "Checklist for Possible Problems" (page 18 to 19)
and attempt to identify the problem before arranging to have the device repaired. If the
problem persists, contact your local distributor (see page 21).
● If the device malfunctions, appears damaged, or needs service, please contact your
local distributor.
