- 120 or 230 VAC ±10%
- Microprocessor-based controller
- Set exposure time (0.06s-2.50s) automatically through object selection
- Manually set exposure time, range from 0.06s-2.50s according pre-set table
- Patient (small), Patient (large), automatic digital selection
- Manual switch with 3mts (118.11") coiled cable
- Pre-heating* time is between 0.10 and 0.30 seconds, added individually in each equipment
- The accuracy time is ±10%
*Required time by the tube to enable the correct radiation output, while the filament of the X-Ray tube is pre-heating
Dental X-Ray Unit
Z70
70kVp - 7mA
5
2.2. Timer Characteristics
3. Operation Instructions
Important information of safe operation
1. Plug the power cord in an AC120V or 230V
(according the equipment voltage) electrical socket
Don't use electrical outlets other than the correct voltage;
otherwise it might cause fire or electric shock.
2. Don't wet your hand before plugging or unplugging the
power cord
3. Unplug the power cord when the equipment is not in
use for a long period
3.1. Overview
A. Tubehead Handling
The tubehead rotation angle can be adjusted at the horizontal
and vertical, with the maximum moviment degrees:
a. Vertical - ±
° (with limited moviment)
135
b. Horizontal - ±360° (with limited movement)
WARNING
Both moviments are not free rotate. Respect the limits and the indicative label!
Respect the maximum movement
limit in both sides
Warning
This X-Ray head is not 360° free rotate
Operation Manual
a.
b.
