26
Basic Editing
The XYZrobot Editor provides a simple and effective method to create, edit and remove pose and
sequence entries.
The following section provides step-by-step instructions for creating complete pose and sequence
entries.
Creating a Pose
Before you open the XYZrobot Editor, it is necessary to connect the Robotic Arm and computer
through a USB cable.
The following procedure provides detailed instructions to allow you to create a pose:
1.
Connect the Robotic Arm to your computer. Connect one end of a USB cable to the computer
(USB Type A), and the other end to the Robotic Arm (USB Type Mini-B).
2.
Once connected, power up the Robotic Arm, see “Testing the Robotic Arm” in the Assembly
Manual.
3.
Locate and open the XYZrobot Editor application.
4.
From the toolbar, select
Project > New
.
5.
Enter a new project name in the name field.
6.
Click the
Model
drop-down field and select
Robotic Arm
.
7.
Click
OK
to continue or
Cancel
to return to the previous menu.
8.
From the toolbar, select
Config > Port Setting
to open the option window.
9.
A list of available ports displays in the window. Select the port that is assigned to the connected
Robotic Arm.
10.
Click
Ok
to continue.
Operations
03
