07
Safety Guideline
•
If liquid has seeped inside the torso or battery casing:
1.
Disconnect all cabling from the power socket then disconnect the other cabling end from the
robot.
2.
Turn off the robot.
3.
Place the robot in the default posture.
4.
Dry the robot as much as possible.
5.
Disconnect and remove the battery casing.
6.
Let the robot air dry completely before installing the battery casing.
7.
Once completely dry, install the battery casing.
8.
Turn on the robot.
NOTE:
For information on your warranty coverage see the Warranty in this assembly manual.
