11
The recommended installation position is as follows:
* The top cover buckle file can be downloaded from the website.
It is recommended to print the top cover buckle in ABS material.
Filament Installation
The feeding module is located at the back of the printer. Put down the filament holder first, and
place the filament on the spool holder. Pull out a section of the filament and insert it into the
feed port.
Note :
Before pushing the filament into the guide hole, please cut the tip of the filament off at a 45°
.
Side cover and Top cover installation
Starting from the internal side of the printer, install the side cover towards the latch direction.
The top cover is placed directly on the top of the printer.
