NOTE: To unload the extruder module, first detach the
heating bus and press the black disengage button.
Ensure that the guide tube
is properly inserted into the
feed port of the extruder
module to complete the
installation.
3
Ensure that the guide
tube has been tightly
inserted into the port.
1
Feed the guide tube
through the slot at the
top of the printer to
the extruder module.
2
Make sure that the printer is
powered off. Place the extruder
module that the fitting pin is
secured the proper location.
1
Insert the black ribbon
connector to complete
the installation.
2
Installing the
Accessories
1. Install the guide tube
Installing the
Extruder module
- 4 -
