Print Bed Adjustment
As the printer encounters issues, please refer to the following troubleshooting instruction to fix the issues. If the issue cannot be removed, please contact
customer service center.
Support Details
Keep original packaging material in the event of sending your unit back for repair. If other packing materials are used instead, the printer may be damaged
during the transportation process.. In such situation, the XYZprinting the right to charge repair fee.
Maintenance and Service
Tools to prepare:
Leveling tool
T10 screw drivers
Use Jog Mode and Home Axes functions to
move the Z-AXIS to its original position at the
bottom.
1
1
2
Loosen the 4 screws shown on the diagram.
Do not loosen any of the other screws. (Note:
You only need to loosen the screws, not
remove them completely).
6
Use the Jog Mode and move the Z-AXIS downwards 1 mm at a time until
it is completely aligned with the X-AXIS support and calibration tool.
7
Check that the calibration tool and X-AXIS support are in full-contact
with each other, then tighten the 4 loosened screws.
8
Place the adjustment tool on the platform
directly below the X-AXIS support.
5
Manually move the printing module to the right
side to prevent affecting its calibrated position.
4
Use Jog Mode and move the Z-AXIS upwards
by 10 mm.
3
Open the cover in front of the left side.
2
2
1 2
3
4
At least 10 cm
Within 1-cm diameter
1cm diameter
of the circle
- 15 -
