Apr. 2017
P 18
da Vinci
Jr.1.0A
3. Please remove extruder model and guide tube.
(Please refer to“Guide Tube and Extruder Module Removement” section in the “Accessories Installation” chapter.)
1. Please install laser engraving module in bracket and
press module to holder.
2. Install spring on the top of laser engraving module.
Install Laser Engraving Module
●
Reminder:
If you want to detach laser engraving module, please follow process below:
1. Please select “CHANGE NOZZLE”and then turn off power
2. Please remove spring on the top of the laser engraver module
3. Press black button on the top of the laser engraver module then remove it.
4. Please keep laser engraver module in proper storage after you module detachment.
Guided Setup
TURN OFF POWER
AND THEN CHANGE
NOZZLE MODULE
UTILITIES
CALIBRATE
BUILD SAMPLE
CHANGE NOZZLE
1. Please remove filament spool in the printer.
(more guideline on da Vinci Jr. 1.0A user manual in the section of “Utilities”>”Unload”)
2. Please select “CHANGE NOZZLE ”and smart extruder will reposition to working position.
Then, screen on the printer will show ”TURN OFF PROWER AND THEN CHANGE NOZZLE MODULE” and you can
turn off power.
(Please ensure the printer power off before you change the module.)
da Vinci Jr. 1.0A Setup before Change Module
●
Select Module
