Ver. 1.6 June
2015
da Vinci
Jr.1.0
P 5
Note: Please follow these steps and ensure that the guide tube is properly installed before
starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt
fi
lament feed.
Reminder: If you are not too sure where the feed module tube port is,
you may open the casing of the machine to see the indication label.
Installing the Accessories
Ensure that the guide tube has been tightly
inserted into the port to complete the guide tube
installation process.
Direct the guide tube from the tube movement area
out of the machine and then insert the other end of
the
fi
lament tube into the feed module tube port.
．
Guide tude
3
4
Before installing the guide tube, turn off the printer
and move the extruder to the far left-end of the
X-axis. If not done otherwise, the print quality will
be affected.
After the extruder has been adjusted, insert the guide
tube into the extruder.
2
1
．X axis
