5
the unit will be under the status of no password. If the user sets “100” then means the
unit will be under the password status. Press “SET” key once to finish password
setting and the unit will backup mode, the user can continue set other modes or back
from the setting mode.
4.
Temperature Correction Setting
Press “SET” key once when the LED displays “F-2” and flashes that the unit enters
the Temperature Correction Mode. At this moment, the LED displays preset correction
value.
A: Operation of Centigrade temperature correction
（Range +99℃~-99℃）
Press “▲” or “▼” key to change the temperature correction value.The first digit “— ”
in LED display means minus (actual temperature is down), “No display” means plus
(actual temperature is up).
B: Operation of Fahrenheit temperature correction
（Range +178℉~-178℉）
Press “▲” or “▼”key to change the temperature correction value. The first digit “— ”
in LED display means minus (actual temperature is down), “No display” means plus
(actual temperature is up).
Press “SET” key once to finish the temperature correction and the unit automatically
backup mode. The user may continue set other modes or back from the current setting
mode.
Example for temperature correction:
A:The temperature set to the
℃:
The current set temperature value is 300
℃,
however,
the actual temperature is only 290
℃
. So it needs to correct by +10
℃
. Correction method:
if the current correction value is 00 or -00; then change it to 10. If the current correction
value is -20, then change it to -10. If the current correction value is 20, then change it to
30.
B: The temperature set to the
℉:
The current set temperature value is 392
℉,
however,
the actual temperature is only 374
℉
. So it needs to correct by +18
℉
. Correction method:
if the current correction value is 00; then change it to 18. If the current correction value is
-20, then change it to -02. If the current correction value is 20, then change it to 38.
5.
Sleep Mode Set
Press “SET” key one time when the LED displays “F-3” and flashes, the unit enters the
Sleep mode status. At this moment, the LED displays the pre-set value. Press “▲” or
“▼” key to change the set value. If set value reads “000” that means the unit set in
“Sleep” mode releasing status. If the display read “100” that means the unit set in
“Sleep” mode. Press “SET” key once to finish the sleep mode setting, then the unit
automatically backup. The user may continue set other modes or back from current set
mode.
*Please note the manufacturer original design will keep in “Free” status without setting
“Sleep” mode.
Dystrybucja i serwis
Dane kontaktowe:
NDN - Zbigniew Daniluk
ul. Janowskiego 15
02-784 Warszawa
tel.: (22) 641-15-47
e-mail: [email protected]
NIP: 521-044-00-73
