Xylem YSI DIQ/S 182-XT-4-PR, Operation Manual

Page: 84 / 144

The SETTINGS menu System 182-XT-4
5 - 2 ba76027e02 12/2014
5.3 Sensor S01 to S04
In this menu, you can assign a name of your choice to a sensor and
adjust the sensor so it optimally meets the requirements of your
application (measured parameter, measuring range, etc.).
All settings are specific for the respective sensor type. They can only
be modified if the sensor is connected and communicates properly with
the DIQ/S 182-XT-4-PR. Otherwise, the dataset is inactive. How to
deal with inactive datasets is described below.
Procedure:
Carrying out settings
If the selected system language is not available in a sensor,
all displays of this sensor appear in the standard language,
English. To activate the selected system language for this
component, a software update of the component is
required. Contact YSI.
General steps for editing sensor settings are given below.
The Sensorname menu item is always on the first position
of the setting table. Details of further sensor settings can be
found in the chapter, C
OMMISSIONING
of the sensor
operating manual.
5 Open the SETTINGS menu with
s
.
6 Using
w
and
g
select and confirm the S0x Sensor menu
item (corresponding to the sensor number).
The following note appears:
If the measuring mode or measuring range is changed, the
links of the sensor are erased. .
7 If you want to continue, press
g
.
The setting table of the sensor is displayed.
8 Edit the setting table as described in section 4.3.2.