Xylem WTW Multi 3430, Operating Manual

Page: 33 / 134

Operation
Multi 3430
33
ba75865e19 04/2015
4.4 Sensor-independent settings
The Storage & config menu includes the following settings:

System (see section 4.4.1).

Data storage (see section 4.4.2)
4.4.1 System
Overview The following sensor-independent meter characteristics can be
adjusted in the
Storage & config / System menu:

Menu language

Beep on keystroke

Loudness of the beep

Illumination

Brightness

Interval of the automatic switchoff

Data interface

Clock and date function

Reset of all sensor-independent system settings to the default con-
dition
3 Select and confirm the Time menu with <

><

> and <MENU/
ENTER> .
The hours are highlighted.
4 Change and confirm the setting with <

><

> and <MENU/
ENTER> .
The minutes are highlighted.
5 Change and confirm the setting with <

><

> and <MENU/
ENTER> .
The seconds are highlighted.
6 Change and confirm the setting with <

><

> and <MENU/
ENTER> .
The time is set.
7 If necessary, set the Date and Date format . The setting is made
similarly to that of the time.
8 To make further settings, switch to the next higher menu level
with
<ESC> .
or
Switch to the measured value display with
<M> .
The instrument is in the measuring mode.