84
3) Place sample in the oven
If the «
Insert sample (use last 0
– vial value)
» option is selected, the sample is placed directly in the oven and
the procedure continues as described from this point onwards.
Fig. 74
The 0
– Vial is removed from the oven, the sample vial is inserted and confirmed with <
OK
The status of the sample changes to «
Active
» (Fig. 75) and the measurement begins (Fig. 76).
Fig. 75
Fig. 76
At the end of the titration, a prompt to remove the sample vial is displayed after the gas supply has been turned
off and the head has been moved upwards. (Fig. 77).
Fig. 77
If the «
Leave head down at end of method
» option is activated in the method, this message is not displayed;
the gas supply remains and the needle head down.
