Xylem rule Rule-Mate, Instruction Manual

Page: 4 / 52

4
Waste and emissions regulations
Observe these safety regulations regarding waste and emissions:
Wash the skin and eyes
Follow these procedures for chemicals or hazardous fluids that have come into contact with your eyes or skin:
• Appropriately dispose of all waste
• Handle and dispose of the processed liquid in compliance with applicable
environmental regulations
• Clean up all spills in accordance with safety and environmental procedures
• Report all environmental emissions to the appropriate authorities
ENVIRONMENTAL SAFETY
Electrical installation
For electrical installation recycling requirements, consult your local electric utility
Recycling guidelines
Always follow local laws and regulations regarding recycling
WARNING: Radiation Hazard. Do NOT send the product to Xylem if it has been
exposed to any nuclear radiation
Condition
Chemicals or
hazardous fluids
in eyes
Chemicals or
hazardous fluids
on skin
Action
1. Hold your eyelids apart forcibly with your fingers
2. Rinse the eyes with eyewash or running water for al least 15 minutes
3. Seek medical attention
1. Remove contaminated clothing
2. Wash the skin with soap and water for a least 1 minute
3. Seek medical attention, if necessary
DANGER: This product is not intended for damage control or to deal with flooding result-
ing from hull damage. This product is intended to be used in Bilge Pumping Systems for small
craft with a hull length up to 79 feet (24 meters), as described within the introduction and
scope of ISO 15083. Bilge Pumping Systems, as specified in ISO 15083, are limited to normal
amounts of water in an intact boat due to spray, rain, seepage, spillage, and occasional small
amounts of water shipped from boat movements in heavy weather. Use of product in any other
way could result in flooding, catastrophic damage to craft, serious personal injury, or death.