3
ELECTRICAL HAZARD:
These are examples of other categories that can occur. They fall under the ordinary hazard
levels and may use complementing symbols:
•
Crush hazard
•
Cutting hazard
•
Arc flash hazard
General safety rules
These are safety rules apply:
•
Always keep work area clean
•
Pay attention to the risks presented by gas and vapors in the work area
•
Avoid all electrical dangers. Pay attention to the risks of electric shock or arc flash hazards
•
Always bear in mind the risk of drowning, electrical accidents and burn injuries
USER SAFETY
Safety equipment
Use safety equipment according to the company regulations. Use this safety equipment within the work area:
Electrical connections
Electrical connections must be made by certified electricians in compliance with all
international, national, state and local regulations. For more information about requirements,
see sections dealing specifically with electrical connections.
•
Hard hat
•
Safety goggles, preferably with side shields
•
Protective shoes
•
Protective gloves
•
Gas mask
•
Hearing protection
•
First-aid kit
•
Safety devices
NOTICE:
Never operate a unit unless safety devices are installed.
Precautions before work
Observe these safety precautions before you work with the product or are in connection with the product:
•
Make sure that you have a clear path of retreat
•
Make sure that the product cannot roll or fall over and injure people or damage property
•
Allow all system and pump components to cool before you handle them
•
Make sure that the product has been thoroughly cleaned
•
Disconnect and lock out power before you service the pump
Summary of Contents for rule Rule-Mate
