Xylem FLYGT 2640.181, Service And Repair Instructions, Page: 33 / 72

1 2
3
WS008557A
1. Inner fasteners
2. Outer fasteners
3. Outermost holes
a) Remove the outer fasteners.
b) Remove the inner fasteners.
c) Install two screws through the adapter into the stator housing. Tighten the screws
until the heads are below the surface of the adapter.
Use M8×60 screws with hexagon socket heads.
WS009673A
d) Attach the pullers to the top of the adapter with the cylinders facing upwards.
Use one screw M10×35 through the edge hole of each puller. The center hole of
each puller must be directly over one of the lower screws.
4 Maintenance
2640.181/.281 Service and Repair Instructions 31