en – Original Instructions
26
e-IXP, e-IXPC, e-IXPF series – Additional Installation, Operation and Maintenance Instructions
6
Maintenance
6.1
Precautions
Before starting, make sure that the safety instructions shown in
on
page 5 have been fully read and understood.
WARNING:
Maintenance must be done by a technician possessing the technical-professional requirements
outlined in the current regulations.
WARNING:
Always wear personal protective equipment.
WARNING:
Always use suitable working tools.
DANGER: Electrical hazard
Before starting work, check that the electric power supply is disconnected and locked out, to
avoid unintentional restart of the unit, the control panel and the auxiliary control circuit.
DANGER: Electrical hazard
If the unit is connected to the frequency converter, disconnect the mains power supply and
wait at least 10 minutes for the residual current to dissipate.
WARNING: Risk of crushing of hands and feet
During maintenance and troubleshooting, secure the unit or parts of the unit to prevent
tipping and falling.
WARNING:
In the case of liquids that are excessively hot or cold, pay attention to the risk of injury.
WARNING:
Make sure that the drained liquid cannot cause damage or injuries.
WARNING:
It is prohibited to dispose of lubricating fluids and other hazardous substances in the
environment.
