Xycom XVME 200, Manual

Page: 6 / 57

XVME-200/290 Manual
December, 1987
1.2 MANUAL STRUCTURE
This manual consists of three chapters which divide the various aspects of module
specification and operation into three distinct areas.
The three chapters develop
these aspects in the following progression:
Chapter One - A general description of the XVME-200/290 Digital I/O Module,
including complete functional and environmental specifications, VMEbus com-
pliance information, and a block diagram.
Chapter Two - DIO Module installation information covering module specific
system requirements, jumpers, and connector pinouts.
Chapter Three - Details covering functional addressing, interrupt enabling, and
programming considerations/requirements.
The Appendices are designed to provide additional information in terms of the
backplane signal/pin descriptions, a block diagram and assembly drawing, and module
schematics.
NOTE
In order to fully document the complex vers-
atility of the XVME-200/290 and the 68230 PI/T
device, a manual kit is being shipped with the
XVME-200/290 DIO Module (the manual kit is
referenced as XYCOM Part #74200-001).
This
kit consists of two parts: a *Motorola MC68230
M a n u a l ( c ) ( r e f e r e n c e d a s X Y C O M P a r t
#74200-003), a n d a n XVME-200/290 M a n u a l
(referenced as XYCOM Part #74200-002.
It is recommended that
the user read
(completely) the 68230 Manual prior to reading
further in the XVME-200/290 M a n u a l . A f t e r
becoming familiar with the 68230 and how it is
programmed,
t h e u s e r s h o u l d t h e n r e a d t h e
r e m a i n d e r o f t h e XVME-200/290 M a n u a l t o
become acquainted with module base addressing,
register
access
offsets, interrupt control,
h a n d s h a k e c o n t r o l ,
and o p e r a t i o n a l
mode/programming constraints.
* MC68230 Parallel Interface/Timer Manual, (c)Motorola Inc., 1983
1 - 2