Activation failed screen
√ If the “Activation Failed!” message displays, follow steps below to
troubleshoot it.
● Verify ignition is ON;
● Make sure the OBDII connector is securely attached
● Check that the park brake is released;
● Turn the ignition off and turn it back to on 10s later;
● Repeat step 1-2.
√ If the “Activation Failed!” message does not go away, then contact
your local distributor or the manufacturer’s customer service
department for assistance.
5.1.2.5 Adaptation
The
Adaptation
function is used to set
new calipers thickness of rear
brake calipers after changing brake discs & pads on Audi A8 models.
To set new caliper thickness:
1. Use the UP/DOWN key to select Adaptation from
Individual
EPB400 EPB Service Tool User’s Guide
48
