XVision XP116VS User Manual Download Page 32

Page: 32 / 158

The other ways is to press power button on the front panel for at least 3 seconds, system will

stop all operations. Then you can click the power button in the rear panel to turn off the NVS.

4.1.4 Auto Resume after Power Failure

The system can automatically backup video and resume previous working status after power

failure.

4.1.5 Replace Button Battery

Please make sure to use the same battery model if possible.

We recommend replace battery regularly (such as one-year) to guarantee system time

accuracy.

Note:

Before replacement, please save the system setup, otherwise, you may lose the data

completely!

4.2

Manual Record

4.2.1 Live Viewing

After you logged in, the system is in live viewing mode. You can see system date, time and

channel name. If you want to change system date and time, you can refer to general settings

(Main Menu->Setting->General). If you want to modify the channel name, please refer to the

display settings (Main Menu->Setting->Display)

Preview Zoom Function

Move your mouse to the left top corner of the preview interface; you can see the preview

zoom button. See Figure 4-6. Left click the icon; you can see a hook icon. Now you have

enabled the preview zoom function. You can drag the mouse to zoom in the image.

Figure 4-6

4.2.2 Manual record
Note:

You need to have proper rights to implement the following operations. Please make sure the

HDD has been properly installed.

4.2.2.1 Manual record menu

Recording status

Video loss

Motion detection

Camera lock

Preview

zoom button

Summary of Contents for XP116VS































































































































































Search results

Summary of Contents for XP116VS

Reviews:

Related manuals for XP116VS

Brands by name

Popular brands

XVision XP116VS, User Manual

Search results

Summary of Contents for XP116VS

Reviews:

Related manuals for XP116VS

Brands by name

Popular brands