XTS 9300S-HDS Series User Manual Download

Page: 8 / 61

Hardware Installation

2.1 Install Hard Drive

Check the unit and the accessories after getting the DVR. Please don‟t power up the unit till
the physical installation is complete.

Notice:

1. This series support two SATA hard drives. Please use the hard drive

XTS Corp

recommend specially for security and safe field.

2. Please calculate HDD capacity according to the recording setting. Please

refer to “Appendix B Calculate Recording Capacity”.

①

Loosen the screws on the back and side of the device to remove the cover.

②

Put the HDDs on the bottom of the device and turn over the device and fix the HDDs

with the screws.

③

Connect the power and data cables and install the cover back and fix it with the screws.

2.2 Front Panel Descriptions

Summary of Contents for 9300S-HDS Series





























































Search results

Summary of Contents for 9300S-HDS Series

Reviews:

Related manuals for 9300S-HDS Series

Brands by name

Popular brands

XTS 9300S-HDS Series, User Manual

Search results

Summary of Contents for 9300S-HDS Series

Reviews:

Related manuals for 9300S-HDS Series

Brands by name

Popular brands