14
4.2.3 Mask
If there is something you don‟t want to display in the live image. You can set mask. For a
given channel a maximum of three areas can be masked.
To set up mask area:
①
Go to Menu
Setup
Live
Mask interface.
Fig 4-8 Live Configuration-Mask
②
Click “Setting” button to go to live image.
③
Press and drag the left mouse button to set mask area as shown below.
④
Right click to exit the mask setting interface.
⑤
Click “Apply” button to save the setting.
To delete mask area
①
Click “Setting” button in the mask interface.
②
Select a certain masked area and double click to delete that masked area.
③
Then click “Apply” button to save the setting.
Fig 4-9 Setting Mask Area
4.3 Record Configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record,
stamp and snap.
