50
ET5000 User Manual
The gateway for Smart Linux TV
F. Network
Setup
[ : Press
Æ
‘Setup’
Æ
‘System’
Æ
‘Network’]
ET5000 is integrated with standard 10/100Mbps Ethernet with RJ 45 connector standard. You are recommended
to use this network capability of ET5000 to fully enjoy the system. You can setup the network settings through this
Network Configuration
menu.
In the
Network Configuration
menu, you will see five sub menus as follows:
①
Adapter settings
Through this menu, you can set the basic Ethernet configuration.
●
User Interface
YES
is used to activate the Ethernet. If you set this option at
NO
, the Ethernet will not work.
●
Use DHCP
YES
is used to use
DHCP (Dynamic Host Configuration Protocol)
. If you set this option at
YES
, it will
automatically detect the correct IP address.
NO
is used when you want to use a certain fixed IP address. In this
case, you need to enter correct addresses in each field.
Summary of Contents for ET5000
Page 1: ......
