Xtreme XR1270, Operation & Safety Manual

Page: 62 / 80

Page 60
Xtreme Manufacturing, LLC
Operation XR1270
1.
Position the forklift directly behind the attachment
NOTE: Allow enough distance to extend the boom
approximately 18 to 20 inches (0 46 to 0 5 meters)
Figure 7-21. Position Quick Attach Adapter In Line With Attachment.
2. Tilt the quick attach adapter forward
3. Extend the boom and/or drive the forklift forward
until pivot pins (A) are below and between the two (2)
attachment hooks (B)
Figure 7-22. Drive Vehicle Forward To Align Pivot Pins (A) With
Attachment Hooks (B).
4.
Raise the boom until pivot pins (A) have seated fully in
attachment hooks (B)
Figure 7-23. Raise Boom To Seat Pivot Pins (A) In Attachment
Hooks (B).
5. Tilt the attachment up slightly The quick attach
adapter should be tight against the rear of the
attachment Align the holes between the quick attach
adapter and attachment
Figure 7-24. Tilt Attachment To Align Holes Between Quick Attach
Adapter and Attachment.
(A) Not Aligned. (B) Aligned.