Xtreme XR1270, Operation & Safety Manual

Page: 43 / 80

For information call (800) 497-1704
Page 41
XR1270 Operator Cab
Rear Axle Centering Indicator
The rear axle centering indicator illuminates when the rear
wheels are aligned perpendicular to the rear axle The rear
wheels must be aligned perpendicular to axle in order to
change the steering select switch
If the rear axle centering indicator does not illuminate,
stop the forklift, follow proper shut down procedures,
tag the forklift with “Do Not Operate” tags, and have a
qualified mechanic service or repair the forklift BEFORE
placing it into service again
Figure 6-30. Rear Axle Centering Indicator.
Steering Select Switch

Warning
DO NOT change steering modes until the forklift slows
or comes to a complete stop. Align all four (4) wheels
perpendicular to the axle, before changing steering
mode. Changing steering modes at higher travel
speeds can make the forklift unstable, and cause a loss
of control, which could result in death, serious injury,
or property damage.
The steering select switch has three (3) steering
positions: Crab, Two Wheel Steering (2W), and Four
Wheel Steering (4W)
Figure 6-31. Steering Select Switch.
Declutch Indicator
The declutch indicator illuminates when the declutch
switch is set to the ON position
If the declutch indicator does not illuminate, stop the
forklift, follow proper shut down procedures, tag the
forklift with “Do Not Operate” tags, and have a qualified
mechanic service or repair the forklift BEFORE placing it
into service again
Figure 6-32. Declutch Indicator.
Declutch Switch
The declutch switch (in conjunction with the service
brake) disengages the transmission to prevent the forklift
from moving while raising or lowering a load
• When the declutch switch is set to ON and the service
brake applied, the transmission is disengaged
• When the declutch switch is set to OFF, the transmission
remains engaged when the travel select lever is set to
either FORWARD or REVERSE
Figure 6-33. Declutch Switch.