Xtreme XR1270 Operation & Safety Manual Download | Manualshive

Page: 51 / 80

background image

For information call (800) 497-1704

Page 49

XR1270

Operation

Pre-Operation Inspection Checklist

Walk around the ENTIRE forklift while visually performing the pre-operation inspection.

  Check that “Do Not Operate” tags have not been placed on the forklift
  Check that load capacity charts are legible
  Check that frame level indicator is working properly
  Check condition and operation of the seat belt and mounting hardware
  Check that Operation and Safety Manual is in the protective case and legible
  Check forks for welds, cracks, misalignment, or any other damage

Check that carriage assembly crossbar is straight and in place to prevent forks from changing position or coming off

the carriage

  Check all hydraulic hoses and hose connections for wear or leaks
  Check tilt cylinder for leaks or any other damage
  Check boom for straightness or any other damage
  Check all four (4) tires and wheels for:

Punctures, cracks, cuts, gouges, bulges, foreign objects, or any other damage to tires

Loose or missing lug nuts

Bent flanges or any other damage to rims

  Check front and rear sway cylinders and hoses for leaks or any other damage
  Check mirrors for cracks, cleanliness, and proper adjustment
  Check hydraulic reservoir sight gauge for proper fluid level   Add hydraulic fluid, if necessary
  Check engine compartment for:

Loose or damaged belts, hoses, and radiator blades

Coolant reservoir level Add radiator coolant, if necessary

Engine oil level Add engine oil, if necessary

Electrical wires and connectors

  Check transmission fluid level
  Check front and rear axles for leaks or any other damage
  Check main boom cylinders and hydraulic lines for leaks or any other damage
  Check battery terminals for corrosion
  Check battery for cracked, melted, or damaged case
  Check electrical connections on rear sway cylinder
  Check that all labels are legible   Replace any damaged or illegible labels
  Check that operator’s cab is empty of all trash, debris, or any loose items
  Check that personal belongings are secured in the personal storage box
  Check that pedals, and non-skid surfaces are clean and free of grease, oil, dirt, snow, or ice

Date: __________________________ Initials: __________________________

«
...
49
50
51
52
53
...
»

Summary of Contents for XR1270

















































































Reviews:

No comments

Related manuals for XR1270

LIGHTLIFT 1775 PERFORMANCE

Brand: Hinowa Pages: 4

Brand: Skyjack Pages: 85

Brand: Skyjack Pages: 98

3215 SJIII Compact Series

Brand: Skyjack Pages: 104

Brand: Skyjack Pages: 114

Brand: Skyjack Pages: 177

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands