Operation Manual
47
www.XMFG.com
Operation
Battery posts, terminals, and related accessories
contain lead and lead compounds, chemicals
known to the State of California to cause
cancer, birth defects, or other reproductive
harm. Wash hands after handling these items.
Lead-acid batteries produce flammable and potentially ex-
plosive gases. To avoid death or serious injury when check-
ing, testing, or charging batteries:
•
DO NOT use smoking materials near batteries.
•
Keep arcs, sparks, and open flames away from batteries.
•
Provide ventilation for flammable vapors.
•
Wear proper personal protective equipment, including
safety glasses.
Fluid in electric storage batteries contains sulfuric acid,
which is poison and could cause severe chemical burns.
Avoid all contact of fluid with eyes, skin, or clothing. Use
protective gear when handling batteries. DO NOT tip a bat-
tery beyond a 45° angle in any direction.
If contact does occur, follow these First Aid suggestions:
•
External contact
- Flush with water.
•
Eyes
- Flush with water (including under the eyelids)
for at least 15 minutes and get medical attention
immediately. Flushing must begin immediately to
avoid permanent eye tissue damage.
•
Internal contact
- Drink large quantities of water or milk
to dilute stomach contents. Do not induce vomiting.
Get medical attention immediately.
IMPORTANT - In case of internal contact, DO NOT give fluids
that induce vomiting.
Warning
Warning
California Proposition 65
Warning
Wear eye protection when starting a telehan-
dler with jump start cables. Improper jump
start procedures could cause the battery to
explode, which could result in death or serious
injury.
•
Never jump start a frozen battery, as it can explode. Let
the battery thaw out before charging.
•
NEVER jump start the telehandler when travel select
lever is in gear, which can cause the telehandler to lurch
forward or backward, and could result in death, serious
injury, or property damage.
•
To avoid injury or death when jump starting with
another telehandler, make sure the two (2) telehandlers
are not touching.
•
DO NOT allow slave cable ends to contact the chassis or
any metallic object.
•
Jump start only with a power source with the same
voltage as the stalled telehandler.
•
Turn off all lights and accessories on the stalled
telehandler to prevent them from operating when the
power source is connected.
•
Electrolyte contains acid and could cause serious
personal injury if it contacts the skin or eyes.
Tires must have proper ballast. DO NOT
replace foam-filled tires with pneumatic tires.
Use of pneumatic tires will severely affect
telehandler load capacity, which could result
in death, serious injury, or property damage.
Warning
When installing and removing slave cable,
ensure loose end of cable does not come in
contact with any metal surfaces or personnel.
Failure to comply may result in injury or death
to personnel.
Warning
Warning
Operate the telehandler with extreme cau-
tion during storms or high winds.