Xtreme XR1045 Alden TIER4 Operation And Safety Manual Download Page 31

Page: 31 / 76

www.XMFG.com

Operation Manual

Operator Cab

Figure 19. Service Brake Pedal

Steering Wheel And Horn Button

Turn the steering wheel (A) left or right to steer the telehan-

dler. One horn button (B) is located in the center of the steer-

ing wheel (A) and another red button (C) on control joystick.

Figure 20. Steering Wheel (A) and horn buttons (B) and (C)

Operator Seat Controls

The operator seat can be adjusted four (4) ways: weight

suspension, lumbar support, fore and aft, and backrest angle.

Figure 23. Operator Seat

Operator Seat

Fire Extinguisher (Optional)

The fire extinguisher is located behind the operator seat.

Figure 21. Fire Extinguisher

Figure 22. Emergency Stop Button

Emergency Stop (Optional)

The optional Emergency Stop cuts the power from the bat-

tery, turning the forklift OFF completely. Use this button in

emergency situations only. To restart the machine, pull/twist

the Emergency Stop and follow machine start-up procedure.

Summary of Contents for XR1045 Alden TIER4













































































Search results

Summary of Contents for XR1045 Alden TIER4

Reviews:

Related manuals for XR1045 Alden TIER4

Brands by name

Popular brands

Xtreme XR1045 Alden TIER4, Operation And Safety Manual

Search results

Summary of Contents for XR1045 Alden TIER4

Reviews:

Related manuals for XR1045 Alden TIER4

Brands by name

Popular brands