www.XMFG.com
Operation Manual
38
Operator Cab
SERVICE REMINDERS
Pressing the SERVICE REMINDERS soft button will display data
pertaining to maintenance schedules.
Figure 43. Service Reminders Menu
TRANSMISSION CALIBRATION
After each transmission oil change the transmission needs
to be re-calibrated to accommodate for clutch wear. When
the TRANSMISSION CALIBRATION button is pressed, the TCU
(Transmission Control Unit) enters transmission calibration
mode and it checks first for all the machine conditions
necessary for a successful calibration. It displays a green check
symbol to the right of the condition if it is met.
Figure 45. Calibration Machine Conditions Check
Figure 46. Clutch Calibration
When all of the machine conditions for calibration are met,
the TCU enters clutch calibration mode.
The TCU starts calibrating the first clutch, and upon successful
calibration it moves to the second clutch and so forth until the
last one is calibrated. The telehandler must be OFF after the
calibration is completed.
If a scheduled service is due, the GAUGE DISPLAY indicates be-
low the tachometer in the hour meter box, the service needed.
Figure 44. Service Requested
CLOCK SETUP
Pressing the CLOCK SETUP soft button will enter a menu
where the clock can be setup or adjusted.
Figure 42. Clock Setup Menu
