Xtreme XR1045 Alden TIER4 Operation And Safety Manual Download Page 30

Page: 30 / 76

www.XMFG.com

Operation Manual

Operator Cab

Warning

A brief description of controls, indicators, and

instruments is provided as a convenience for

the operator. These descriptions DO NOT pro-

vide complete operation instructions. Read

and understand the entire manual to pre-

vent death, serious injury, or equipment damage.

Ignition Switch

Figure 16. Ignition Switch and Key

The ignition switch has three (3) positions: OFF, RUN, and

START. A key is required to operate the ignition switch.

Ignition Switch

Position

Purpose

OFF

Shuts down entire electrical system, except

the horn and accessory outlet.

RUN

All controls and indicators are operable.

START

Engages starter motor to crank engine.

NOTE: The START position is spring-loaded. When the knob

is released, the Ignition switch will automatically return to the

RUN position.

Accessory Outlet

A 12 Volt accessory outlet is provided as a power source for

personal items, such as a radio or cell phone.

Figure 17. 12 V Accessory Outlet

Accelerator Pedal

Press the accelerator pedal to increase engine speed. The ac-

celerator pedal is spring-loaded to return to idle speed.

Figure 18. Accelerator Pedal

Service Brake Pedal

Press the service brake pedal to slow or stop the telehandler.

The service brake pedal activates the service brakes on all four

(4) wheels.

Operator Cab

Summary of Contents for XR1045 Alden TIER4













































































Search results

Summary of Contents for XR1045 Alden TIER4

Reviews:

Related manuals for XR1045 Alden TIER4

Brands by name

Popular brands

Xtreme XR1045 Alden TIER4, Operation And Safety Manual

Search results

Summary of Contents for XR1045 Alden TIER4

Reviews:

Related manuals for XR1045 Alden TIER4

Brands by name

Popular brands